Skip header
 

Data Management

Menu Protect

You can prevent unauthenticated users from changing the user tools. Menu Protect can be specified for each of the following user tools menus.

For details, see "Specifying Menu Protect", Security Guide.

List / Test Print Lock

When [On] is set, you can lock the [List / Test Print] items.

For details about [List / Test Print Lock] privileges, see "Printer Features", Security Guide.

Delete All Temporary Print Jobs

You can delete all Sample Print, Locked Print, and Hold Print files temporarily stored in this machine.

Delete All Stored Print Jobs

You can delete all Stored Print files stored in this machine.

Auto Delete Temporary Print Jobs

You can specify whether to automatically delete Sample Print, Locked Print, and Hold Print files temporarily stored in this machine. Hold Print files that have valid print time cannot be deleted automatically.

Default: [Off]

If you select [On], you can set up to 200 hours for auto file deleting (Default: "8").

Auto Delete Stored Print Jobs

You can specify whether to automatically delete Stored Print files temporarily stored in this machine.

Default: [On], "3" day(s)

If you select [On], you can set up to 180 days for auto file deleting.

Tray Parameters

If the machine is replaced with another manufacturer's machine, use the previous machine's tray parameters. You can register up to three tray parameters. You cannot specify the same tray parameter for different paper trays.

  • Tray Parameters (PCL)

    You can configure settings to change paper tray parameters used for PCL printing. You can specify the settings for the installed trays and the Auto Tray Select function.

  • Tray Parameters (PS)

    You can configure settings to change paper tray parameters used for PostScript printing. You can specify the settings for the installed trays only.

Stapleless Stapler and Staple Display Setting

Default: [Stapleless & Staple Available]

If you select [Stapleless Only Available], the staple position is changed to stapleless upper right or upper left and printing is performed regardless of the printer driver settings.

To use this function:

  • Finisher SR3210 must be attached to the machine.

  • You must specify [On] in [Admin. Authentication] on the machine.

    For details about [Admin. Authentication], see "Configuring Administrator Authentication", Security Guide.

Note

PreviousNext