Previous
This section describes the configuration page.
System Reference
Machine ID
Displays the serial number assigned to the board by its manufacturer.
Total Memory
Displays the total amount of memory (SDRAM) installed on the machine.
Total Counter
Displays the total number of pages printed by the machine to date.
Firmware Version
Printer
Displays the version number of the machine firmware.
System
Displays the version number of the system firmware.
Engine
Displays the version number of the machine engine.
LCDC
Displays the version number of the control panel.
NIB
Displays the version number of the network interface.
Device Connection
Displays the installed device options.
HDD: Font/Macro Download
Displays the capacity of the hard disk drive.
Printer Language
Displays the version number of the printer language.
Attached Equipment
Displays the installed optional equipments.
Paper Input
Displays settings made under the [Tray Paper Settings] tab.
Data Management
Displays settings made under the [Data Management] tab.
System
Displays settings made under the [System] tab.
PCL Menu
Displays settings made under the [PCL Menu] tab.
PS Menu
Displays settings made under the [PS Menu] tab.
PDF Menu
Displays settings made under the [PDF Menu] tab.
XPS Menu
Displays settings made under the [XPS Menu] tab.
Host Interface
Displays settings made under the [System] tab.
When DHCP is active on the network, the actual IPv4 address, subnet mask and gateway address appear in parentheses on the configuration page.
Interface Information
Displays the interface information.
Maintenance: Image
Displays settings made under Maintenance: Image menu.
Maintenance: Print
Displays settings made under Maintenance: Print menu.
System Settings
Displays settings made under System Settings menu.
Virtual Printer
Displays whether the virtual printer is active or inactive.
