Skip header
 

General Features

This section describes the user tools in the General Features menu under System Settings.

Program / Change / Delete User Text

You can register text phrases you often use when specifying settings, such as ".com" and "Regards".

You can register up to 40 entries.

  • Program / Change

    1. Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

    2. Flick the screen to the left, and then press the [User Tools] (Operation panel screen illustration) icon.

    3. Press [Machine Features].

    4. Press [System Settings].

    5. Check that [General Features] is selected.

    6. Press [Program / Change / Delete User Text].

    7. Check that [Program / Change] is selected.

    8. Select the user text you want to change.

      To program a new user text, press [*Not Programmed].

    9. Enter the user text, and then press [OK].

      Enter the user text up to 80 characters.

    10. Press [Exit].

    11. Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

    12. Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

  • Delete

    1. Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

    2. Flick the screen to the left, and then press the [User Tools] (Operation panel screen illustration) icon.

    3. Press [Machine Features].

    4. Press [System Settings].

    5. Check that [General Features] is selected.

    6. Press [Program / Change / Delete User Text].

    7. Press [Delete].

    8. Select the user text you want to delete.

    9. Press [Yes].

    10. Press [Exit].

    11. Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

    12. Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

Copy Count Display (copier/Document Server)

The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down).

Default: [Up]

Screen Color Setting

You can change the screen color.

Default: [Blue-gray]

This setting is applied to the classic application screens.

Interleave Priority

Interleave Priority is given to the mode selected.

Default: [Display Mode]

Function Reset Timer

You can set the length of time the machine waits before changing modes when using the multi-access function.

This is useful if you make many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions.

Default: [Set Time], [3 second(s)]

When you select [Set Time], enter the time (3-30 seconds, in steps of 1 second) using the number keys.

The Function Reset Timer setting is ignored if [Switch Every Specified No.] or [Job Order] is set for Interleave Priority.

Output: Copier (copier)

Specify a tray to which documents are delivered.

Default: [Internal Tray 1]

Output: Document Server (Document Server)

Specify a tray to which documents are delivered.

Default: [Internal Tray 1]

Output: Fax (facsimile)

Specify a tray to which documents are delivered.

Default: [Internal Tray 2]

Output: Printer (printer)

Specify a tray to which documents are delivered.

Default: [Internal Tray 1]

Key Repeat

You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.

Default: [Normal]

The key repeat function is available only on the classic application screens.

Measurement Unit

You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.

RegionA icon(mainly Europe and Asia)

Default: [mm]

RegionB icon(mainly North America)

Default: [inch]

System Status/Job List Display Time

Specify how long to display the System Status and Job List display for.

Default: [On], [15 second(s)]

When the setting is [On], you can specify a display time between 10 and 999 seconds in steps of 1 second using the number keys.

External Keyboard

You can specify the layout for an external keyboard which is connected to the USB Host Interface port.

Default: [Off]

The following languages can be set:

RegionA icon (mainly Europe)

[English], [German], [Standard French], [Belgian French], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], [Turkish], and [Greek]

RegionA icon (mainly Asia)

[English], [German], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], and [Turkish]

RegionB icon (mainly North America)

[English], [German], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], and [Turkish]

Compatible ID

You can enable or disable the Compatible ID setting.

If this setting is set to [Active], you can install the printer driver automatically by connecting a computer to the machine via USB or network.

Default: [Active]

Program/Change USB Device List

You can register "Product ID" and "Vendor ID" information for a USB keyboard or IC card reader device to the device list to limit the usage of USB devices. The "Product ID" and "Vendor ID" information for a USB device have been assigned by the manufacturer to identify the individual device. "Product ID" input settings are between 0 and 0xFFFF. "Vendor ID" input settings are between 0x0001 and 0xFFFE. Up to ten pairs of "Product ID" and "Vendor ID" information can be registered.

Energy Saving Recvry. for Business Applicatn.

Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the machine, such as Address Book Management or Browser.

Default: [Off]

If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.

Displayed Application Switchover Timer

Specify when to switch the screen if an event occurs in a different application because there have been no key inputs for a certain period of time in the application screen.

Default: [Set Time], [3 second(s)]

Note