Screen Startup Mode
Select the startup mode of the control panel.
Normal
When you turn on the power, the Home screen appears after the startup screen is displayed. Normal mode uses less energy than Quick mode.
Quick
The Home screen appears as soon as you turn on the power.
Default: [Quick]
Screen SD Card Slot
Specify whether or not enable the SD card slot when you use the functions of the control panel.
Default: [Active]
Operation Panel USB Slot
Specify whether or not enable the USB slot when you use the functions of the control panel.
Default: [Active]
Server Settings
Server Function
Specify whether or not enable the server function.
Default: [Active]
Install Server Certificate
You can install a server certificate for SSL communication.
Function Priority
Specify the mode to be displayed automatically after the operation switch is turned on or when System Reset mode is turned on. You can select one of the following modes:
Home
Cloud Fax
Connector
Copier(Classic)
Copy
Document Server
Fax
Fax(Classic)
Print/Scan(Memory Storage Device)
Printer
Printer(Classic)
Quick Copy
Quick Fax
Quick Print Release
Quick Scanner
Scan to Folder Helper
Scanner
Scanner(Classic)
Web Browser NX
Default: [Home]
Function Key Settings
Function Key
Specify whether or not to enable the function keys.
If the function keys are disabled, [Function Key 1] to [Function Key 3] are not available.
Default: [Inactive]
Function Key 1 to 3
Allocated Function
Specify the application allocated to the function key.
Default: [Not Programmed]
Display Name
Enter the name of up to 64 characters to be displayed in the function key. The name cannot be entered if [Allocated Function] is set to [Not Programmed].
Default: [blank]
IC Card/Bluetooth Software Settings
Specify the IC card reader connected to the control panel or the function used via Bluetooth on the control panel. For details about this function, see "Quick Card Authentication", Security Guide.
User's Own Customization
Specify whether or not to reflect each user's settings on the control panel when the user logs in to the machine.
Default: [Prohibit]
Banner System Message Display Time
Time Message Displayed (sec.)
Specify how long a message is displayed in a banner on the control panel before it switches to the next message. You can select a range of 1.8 to 6.0 seconds in 0.2 second intervals.
Default: [4.0 second(s)]
Time Message Not Displayed (sec.)
Specify how long the banner on the control panel remains blank while a message displayed switches to another one following it. You can select a range of 0.8 to 3.0 seconds in 0.2 second intervals.
Default: [2.0 second(s)]
[Back] key
Specify whether or not to enable the function to return to the previous screen when you are using applications. Even enabled, this function may not be applicable, depending on screens such as those for the top page of an application or error display screens. When the function is disabled, an error tone sounds when you push [Return].
Whether this setting is enabled or disabled, the operation is always enabled for the standard Android application screens or screen features.
Default: [ON]
Initialize Screen Features Settings
You can initialize the settings of the control panel, such as the initial settings, home screen settings, and browser settings on the control panel.
Contact your sales or service representative to use this function.
For details on how to access Screen Features, see Accessing User Tools.