Top Page > Troubleshooting > Clearing Misfeeds > Removing Jammed Paper > Removing Jammed Banner Sheets > If the leading edge of the banner sheet is over the finisher tray

If the leading edge of the banner sheet is over the finisher tray

Previous Next

After pressing the E4 button several times by following the procedure shown in the animation that appears on the screen, if the leading edge of the banner sheet is over the finisher tray, pull the banner sheet from the finisher tray. If the leading edge of the banner sheet is not over the finisher tray, remove the banner sheet from inside the finisher. Since the banner sheet inside the finisher is difficult to see, look carefully into the finisher.