Guide to Functions of the Machine's External Options

Illustration of external options numbered callout illustration

  1. Copy tray

    If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

  2. Banner paper guide tray

    Allows you to load paper that has a horizontal length of 487.8 mm (19.21 inches) or longer in the bypass tray.

  3. Wide LCT

    Holds 2,200 sheets of paper. Use to copy or print onto adhesive labels, translucent paper, and custom size paper.

  4. Extension unit

    Attached to the LCT and holds 2,500 sheets of B4 JISLandscape, A4Landscape, 81/2 × 14Landscape, or 81/2 × 11Landscape paper.

  5. Large capacity tray (LCT)

    Holds up to 4,400 sheets of paper.

  6. A3/11 × 17 tray unit

    You can load paper sizes up to A3Landscape or 11 × 17Landscape in Tray 1 using this unit. To use this unit on your machine, you must contact your service representative and request that they install it for you. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

  7. Copy connector

    Allows you to use the connect copy function.

  8. Twin interposer

    Inserts cover or slip sheets into copied or printed paper.

  9. Multi-folding unit

    The Multi-folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.

  10. Interposer

    Inserts cover or slip sheets into copied or printed paper.

  11. Finisher SR4110

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  12. Booklet Finisher SR4130

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  13. Output jogger

    Jogs the sheets delivered to the finisher shift tray.

  14. Finisher SR4120

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  15. Mailbox

    Sorts printed paper. Consists of mailbox output trays 1–9.

Note

  • You cannot install multiple finishers simultaneously.

  • To use the twin interposer, Finisher SR4110 is required.

  • To use the Multi-folding unit, Finisher SR4120, Booklet Finisher SR4130, or Finisher SR4110 is required.

  • To use the interposer, Finisher SR4120 or Booklet Finisher SR4130 is required.

  • To use the output jogger, Finisher SR4120 or Booklet Finisher SR4130 is required.

  • To use the mailbox, Finisher SR4120 or Booklet Finisher SR4130 is required.

  • Remove printouts from Finisher SR4120 or Booklet Finisher SR4130 by lifting them straightforwardly from the left side. If you remove printouts at an angle or towards the front, the shift tray may rise and catch them.

  • Finisher illustration

Related topics

Removing prints from Finisher SR4120 or Booklet Finisher SR4130 during printing
Removing prints from Finisher SR4110 during printing
When using the Z-fold function with Finisher SR4120 or Booklet Finisher SR4130 and Multi-folding unit
When using the Z-fold function with Finisher SR4110 and Multi-folding unit
Precautions for using Finisher SR4120 or Booklet Finisher SR4130
PreviousNext