Maintenance: Image

You can perform automatic adjustment of color registration. For details, see Adjusting the Color Registration.

You can perform image density adjustment and color calibration automatically for the following resolutions: 600 × 600 dpi (1 bit), 600 × 600 dpi (2 bit), 600 × 600 dpi (4 bit), and 1200 × 1200 dpi (1 bit).

• Adjustment and Calibration

  Performs automatic image density adjustment and calibration for the selected resolution.

• Restore Previous Value

  Restores the previous gamma correction value for the selected resolution.

• Restore Default Value

  Restores the default gamma correction value for the selected resolution.

You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing. For details, see Correcting the Color Gradation.

• Adjust Auto Density

  You can print the gradation of auto density.

• Print Test Pattern 1 for Calibration

  You can print gradation correction sheet 1.

• Print Test Pattern 2 for Calibration

  You can print gradation correction sheet 2.

• Reset Setting

  You can reset the gradation correction value to default.

You can adjust the starting position of the printing page. For details, see Adjusting Printing Position.

You can adjust levels of toner color overlap. If characters or lines blur, setting priority on text may make them clearer. Under normal conditions, set priority on photos.

Default: [Photo Priority]

• Text Priority

• Photo Priority