Replacement Alert
Use this function to specify the supplies to notify user when supplies need to be replaced. Settings can be made separately for Toner, Waste Toner Bottle, Intermediate Transfer Unit, Fusing Unit.
Default: [Normal]
Notify Sooner
Normal
Notify Later
Supply End Option
You can specify whether or not to continue printing after the following components have exceeded their recommended service life.
Default: [Continue Printing]
Continue Printing
Stop Printing
Black & White Page Detect
You can specify whether to recognize black-and-white images by page or by document.
The black-and-white recognition function allows the printer to print monochrome images in monochrome mode even if color printing is specified.
Default: [Per Job]
Per Page
Per Job
Cleaning
You can clear the intermediate transfer unit when white lines appear on printouts.
Curl Prevention
You can control the fuser temperature to prevent paper from curling. Enabling this function may increase the print time and speed for first prints.
Also, the lifetime of the drum unit, intermediate transfer unit, and fusing unit becomes shorter than their normal lifetime.
Default: [Inactive]
Active
Inactive
Anti-droplet (2 Sided Print)
You can specify whether or not to dry the duplex unit before printing to prevent partial dropouts of printed images on the back sides of two-sided printouts. Enabling this function may increase the print time for duplex printing of first prints. Also, the lifetime of the fusing unit becomes shorter than their normal lifetime.
Default: [Inactive]
Active
Inactive
Anti-humidity (Image Dropout Prevention)
You can specify whether or not to prevent partial dropouts of printed images when printing in a high humidity environment.
Default: [Inactive]
Active
Inactive
Black & White Print Priority
You can specify whether or not to reduce consumption of color toner. When this function is enabled, it may take longer to start printing a color page.
Default: [Off]
On
Off
Low Speed Printing (Thick Paper)
You can specify whether or not to lower the print speed of pages on thick paper if lateral streaks appear on the output. Enabling this setting prevents streaks from appearing on the output by lowering the print speed.
If this function is enabled, the lifetime of the toner and drum unit becomes shorter than their normal lifetime.
Default: [Inactive]
Active
Inactive