Previous
Do not disconnect the USB cable while data is being sent to the printer. If you do, printing will fail.
Check the printer and the digital camera are both switched on.
Using a USB cable, connect the digital camera to the printer's USB port A or the media slot.
For details about connecting the digital camera to the printer's USB port A, see Connecting a Device to the Printer's USB Host Interface.
For details about connecting the device via the media slot, see Inserting/removing a memory storage device.
On your digital camera, select the images you want to print, and specify the printing conditions.
The printer receives settings from the digital camera and starts printing.
When printing is finished, check that the control panel of the printer is displaying “Ready”, and disconnect the USB cable from the printer.
Since printing conditions are specified on the digital camera, specifiable meters depend on the particular digital camera. For details, see your digital camera's manual.
Some digital cameras require settings for manual PictBridge operation. For details, see your digital camera's manual.
