Skip header
 

Precautions for Changing the Paper Size

CAUTION

  • When loading paper, take care not to trap or injure your fingers.

Important

  • Do not stack paper over the limit mark.

  • Do not change the size of the paper for the specified printing tray while documents are being scanned or printed.

Note

  • Region A icon(mainly Europe and Asia)
    Tray 1 and the LCT can hold A4Portrait paper only. If you want to print on any of the following paper sizes from these trays, contact your service representative:

    • Tray 1: A3Landscape, A4Landscape, B4 JISLandscape, 11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11PortraitLandscape, 81/2 × 132/5Landscape

    • LCT: B5 JISPortrait, 81/2 × 11Portrait

  • Region B icon(mainly North America)
    Tray 1 and the LCT can hold 81/2 × 11Portrait paper only. If you want to print on any of the following paper sizes from these trays, contact your service representative:

    • Tray 1: A3Landscape, A4PortraitLandscape, B4 JISLandscape, 11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11Landscape, 81/2 × 132/5Landscape

    • LCT: A4Portrait, B5 JISPortrait

  • The extension unit is required to load A4Landscape, B4 JISLandscape, 81/2 × 14Landscape, 81/2 × 11Landscape, or 81/2 × 132/5Landscape into the LCT.

  • After changing the paper size, be sure to specify the appropriate paper size in [Tray Paper Settings]. If you do not, misfeeds might occur. For details, see Changing to a Size That Is Not Automatically Detected.

  • To prevent multiple sheets from being fed at once, fan the paper before loading.

  • Straighten curled or warped paper before loading.

  • For details about the paper sizes and types that can be used, see Recommended Paper Sizes and Types.

PreviousNext