Guide to Components

Front and left view

1. ADF

   Lower the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

   Place originals face down here. For details, see Placing Originals on the Exposure Glass.

3. Copy tray

   Copied/printed paper and fax messages are delivered here.

4. Human detection sensor

   The human detection sensor is on the left side of the machine. For details, see Human Detection Sensor.

5. Main power switch

   To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and turn the switch on.

6. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel.

7. Front cover

   Open to access the inside of the machine.

8. Paper trays (trays 1–3)

   Load paper here.

   Tray 1 is a tandem tray where paper on the left side automatically moves to the right when paper there has run out.

Front and right view

1. ADF's extender

   Pull this extender to support large paper.

2. Ventilation holes

   Prevent overheating.

3. Paper guides

   When loading paper in the bypass tray, align the paper guides flush against the paper.

4. Bypass tray

   Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper trays. For details, see Loading Paper into the Bypass Tray.

5. Extender

   Pull this extender out when loading paper in the bypass tray.

Rear and left view

1. Ventilation holes

   Prevent overheating.