Skip header
 

2. Paper Size

Specify the size and orientation of the paper to be used for printing.

Settings

  • Do not Specify, A0R, A1, A1R, A2, A2R, A3, A3R, A4, A4R, B1R JIS, B2 JIS, B2R JIS, B3 JIS, B3R JIS, B4 JIS, B4R JIS, 36 x 48R, 34 x 44R, 30 x 42R, 24 x 36, 24 x 36R, 22 x 34, 22 x 34R, 21 x 30, 18 x 24, 18 x 24R, AC, ACR, 12 x 18, 12 x 18R, DL, DLR, 9 x 12, 9 x 12R, LG, LGR, 8 1/2 x 13, LT, LTR

Default: Do not Specify

Behavior

  • If paper of the size and orientation specified in this setting is not loaded in any of the paper tray, paper is fed from the paper tray displayed on the control panel.

  • If "Do not Specify" is selected, paper is fed from the paper tray specified in "1. Paper Tray".

Conditions

  • If an item other than "Do not Specify" is selected, the setting for "1. Paper Tray" is ignored.

  • If "On" is selected for "U. Auto Paper Select", this setting is ignored.

  • If either of "tray", "paper", or "autopaper" is specified in the printing option, this setting is ignored.

  • Some paper tray may not be selected.

Note

  • If Auto Tray Switching is enabled, paper may be fed from a different paper tray than the one selected. In order to specify a paper tray, select "Auto" or "Off" in "4. Auto Tray Switching" or specify the "noautotray" printing option.

PreviousNext