1. Paper Tray

• System Default

• Tray 1 (Roll 1): Reg(Portrait)

• Tray 1 (Roll 1): Reg(Landscp)

• Tray 1 (Roll 1): Custom Size

• Tray 2 (Roll 2): Reg(Portrait)

• Tray 2 (Roll 2): Reg(Landscp)

• Tray 2 (Roll 2): Custom Size

• Paper Bypass

Default: System Default

• If "System Default" is selected as the paper tray, the paper tray selected by "Paper Tray Priority: Printer" on the "Tray Paper Settings" tab of "System Settings" is used.

• If a paper size is selected in "2. Paper Size", this setting is ignored.

• If "On" is selected for "U. Auto Paper Select", this setting is ignored.

• If paper cannot be fed from the paper tray specified in this setting due to the limitations of the machine's printer functions, the paper is fed from the paper tray displayed on the control panel.

• If either of "tray", "paper", or "autopaper" is specified in the printing option, this setting is ignored.

• If Rotate Sort is specified in PJL or its relevant printing option, paper may be fed from a paper tray that differs from the selected paper tray.