Make sure no one gets on the machine, sits on it, leans on it, or hangs from it.
When the machine delivers a thick or long original, receive it by hand from the output tray.
If you attach the original stacker and deliver an A1 or larger original to it, receive the paper using both hands.
Two types of original output locations are available.
Upper output
This is the basic original output location.
Originals are ejected onto the original stackers.
Rear output
Originals are ejected onto the original output guides. When copying thick or hard originals, select this output location.
The following types of original should be specified rear output:
Originals larger than A1
Original heavier than 135 g/m2 (36 lb.)
Plain paper that is lighter than 52 g/m2 (14 lb.)
Translucent (vellum) paper that is lighter than 80 g/m2 (21 lb.)