To adjust the image position, you need to:
Prepare a 500 mm or longer stainless steel ruler (with the scale in 0.5 mm) and magnifier (for measuring the format)
Check the supported paper size and paper type.
From the supplied CD, print the file of the format matching the size of the paper requiring image position adjustment.
Adjust the image position on Side 1. For details about adjusting the position, see Adjusting the Image Position on Side 1.
To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Registering a Custom Paper", Paper Settings.
In [Advanced Settings] for the custom paper, set the value in the following settings to "0.000".
002: [Adj Image Position of Side2 Across Feed]
004: [Adj Image Position of Side2 With Feed]
006: [Adj Magnification of Side2 Across Feed]
008: [Adj Magnification of Side2 With Feed]
In [Advanced Settings] for the custom paper, note the values in the following settings, and then adjust the value on one side to match the larger value on the other side.
013: [Adjust Erase Margin of Leading Edge]
014: [Adjust Erase Margin of Trailing Edge]