Previous
Recycled Paper Setting
You can specify the thickness of the recycled paper.
For details about the actual paper weight, see Paper Type Specifications.
Color Paper Setting
You can specify the thickness of the color paper.
For details about the actual paper weight, see Paper Type Specifications.
Letterhead Setting
You can specify the thickness of the letterhead paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Label Paper Setting
You can specify the thickness of the label paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Envelope Setting
You can specify the thickness of the envelope.
The paper thickness can be set for Tray 1 and the bypass tray.
For details about the actual paper weight, see Paper Type Specifications.
Preprinted Paper Setting
You can specify the thickness of the preprinted paper.
For details about the actual paper weight, see Paper Type Specifications.
Replacement Alert
You can specify when the Alert Indicator lights up to prompt users to replace supplies.
Supply End Option
You can specify whether or not to continue printing after the drum unit exceeds its service life.
Display Supply Info
You can specify whether or not the amount of toner is displayed on the initial screen.
Envelope Lever Alert
You can specify whether or not to display an alert when paper other than an envelope is fed from Tray 1 or the bypass tray with the envelope lever lowered.
Menu Protect
You can specify whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.
If you want to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
List/Test Print Lock
You can specify whether or not to prohibit List/Test printing.
You may not be able to change this setting depending on the setting of the printer.
Unit of measure
You can switch the unit of measurement between [mm] and [inch].
Panel Key Sound
You can specify whether or not to enable the panel key sound.
Display Contrast
You can specify the display density by selecting one of seven levels.
Key Repeat
You can specify whether or not to scroll the display panel when the [
] or [
] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Compatible ID
You can enable or disable the Compatible ID setting.
