[Initial Settings]

1

[Master Making Density]

You can specify the default setting for image density that is selected when the power is turned on.

Default: [Normal]

2

[Original Type]

You can specify the original type that is selected by default when the power is turned on.

Default: [Text]

3

[Ratio]

You can specify the reproduction ratio that is selected by default when the power is turned on.

Default: [100 %]

4

[Economy Mode]

You can specify whether to set Economy mode to [On] or [Off] when the power is turned on or the specified mode setting is cancelled.

Default: [Off]

5

[Erase Border Width]

You can specify the edge erase margin. For details about specifying the edge erase margin, see Erase Border.

Default: [5 mm] (0.2 inches)

6

[Program/Change Class]

For details about storing the Class mode settings, see Memory/Class.

7

[Program/Change Memory]

For details about specifying the Memory mode settings, see Memory/Class.

8

[Prog./Change: Dept.]

For details about specifying the settings for the Select Department mode settings, see Memory/Class.