Previous
Copies are punched, and then bound by ring comb.
Original orientation and binding position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the binding positions is as follows:
Placing the original on the exposure glass |
Placing the original in the ADF |
Binding position*1 |
|
|---|---|---|---|
Left
|
|
|
|
Top
|
|
|
|
Right
|
|
|
|
*1 The above table shows binding positioning. The orientation of the paper does not indicate direction of delivery.
Press [Output/ Customize Function/ Finisher].
Press [Finisher].
Select one of the binding positions.
When you select a binding position, Sort is automatically selected.
Press [OK].
Enter the number of copy sets using the number keys.
Specify any other copier functions that you require.
Place the originals, and then press the [Start] key.
