Skip header
 

Entering letters

1Press the [Shift] key to switch between lowercase, uppercase, and Cyrillic characters.

2Press the appropriate Quick Dial key repeatedly until the letter that you require appears.

3To enter additional letters, repeat Step 2.

If the next letter you want to enter is assigned to the same Quick Dial key, move the cursor by pressing [Right arrow key], and then press the Quick Dial key. The cursor moves to the right and the next letter appears on the display.

Keyboard Type A

Illustration of Keyboard Type A

Keyboard Type B

Press one of the following Quick Dial keys to display a basic letter, and then press the [Quick Dial 16] key to select one of its variations.

Illustration of Keyboard Type B

Keyboard Type C

This keyboard type allows you to enter Polish, Hungarian, and Czech letters. Press one of the following Quick Dial keys to display a basic letter, and then press the [Quick Dial 16] key to select one of its variations.

Illustration of Keyboard Type C

Keyboard Type D

This keyboard type allows you to enter Turkish letters. Press one of the following Quick Dial keys to display a basic letter, and then press the [Quick Dial 16] key to select one of its variations.

Illustration of Keyboard Type D

Keyboard Type E

This keyboard type allows you to enter Russian letters. Press the [Shift] key to enter Cyrillic character mode. To enter a letter, press the corresponding Quick Dial key indicated in the table below. Press the key repeatedly until the required letter is displayed.

Illustration of Keyboard Type E

Keyboard Type F

This keyboard type allows you to enter Greek letters. Press the [Shift] key to enter Greek character mode. To enter a letter, press the corresponding Quick Dial key indicated in the table below. Press the key repeatedly until the required letter is displayed.

Illustration of Keyboard Type F

Note

  • To enter a character repeatedly, press a Quick Dial key again.

  • To insert a character, press [Left arrow key] or [Right arrow key] to move the cursor to the position you want to insert.