One-Sided Combine

Combine several pages onto one side of a sheet.

Combine Copies function from two-sided originals is available for SP 3610SF only.

Illustration of One-Sided Combine

There are following types of One-Sided Combine.

For SP 3610SF

Combine: 2 Orig.

Copies two one-sided originals to one side of a sheet.

Combine: 4 Orig.

Copies four one-sided originals to one side of a sheet.

Combine: 1 Orig.

Copies one two-sided originals to one side of a sheet.

Combine: 2 Orig.

Copies two two-sided originals to one side of a sheet.

For SP 3600SF

Combine 1 Side (2 Orig.)

Copies two one-sided originals to one side of a sheet.

Combine 1 Side (4 Orig.)

Copies four one-sided originals to one side of a sheet.

Press the [Copy] key, and then select the setting items using the [ ] or [ ] key.

Press [Duplex/Combine/Series]

Combine Series key illustration

Select the combine mode Press [OK]

Select the paper tray

Place the originals Press [Start]

You cannot apply this function to sheets longer than 356 mm (14 inches) fed from the bypass tray.
The default setting for the original orientation is the unreadable direction (). When placing originals in an unreadable direction, specify the original orientation. To specify the orientation, select [Always Specify] for [Orientation] in [Copier Features], and then perform the following procedure after Step 2. For details about the setting item, see Copier Features.
1. Select the original orientation Press [OK]
When placing originals on the exposure glass, press the [] key after all the originals have been scanned.
To cancel the One-Sided Combine function, press the [Duplex/Combine/Series] key twice.