Skip header
 

Cleaning the Registration Roller

When you use paper other than the standard types, specks of paper may stick on the registration roller, causing problems. Clean the registration roller if white dots appear on prints.

Clean the registration roller if printed paper becomes smeared after clearing a paper jam.

CAUTION


  • The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface". Otherwise, an injury might occur.

Important

  • Do not use chemical cleaners or organic solvents such as thinners or benzine.

1Turn off the main power switch and unplug the power cord.

2Pull out the plug from the socket. Remove all the cables from the machine.

3Push the button on the right side of the machine, and then open the front cover with both hands carefully.

Machine illustration

4Hold the toner cartridge's front handle to lift and pull it out.

Machine illustration

5Wipe around the metallic registration roller by turning it with a soft damp cloth. Then, wipe it with a dry cloth to remove any water.

Machine illustration

6Hold the handle of the cartridge, and then insert it into the machine until it stops.

Machine illustration

7Close the front cover with both hands carefully.

Machine illustration

8Securely insert the plug of the power cord into the wall socket securely. Connect all the interface cables that were removed.

9Turn the main power switch on.