Skip header
 

Cleaning the Paper Feed Roller on the Bypass Tray

If the paper feed roller is dirty, a multi-feed or misfeed might occur. Clean this part by following the cleaning procedure described below.

Important

  • Do not use chemical cleaners or organic solvents such as thinners or benzine.

1Turn off the main power switch and unplug the power cord.

2Pull out the plug from the socket. Remove all the cables from the machine.

3While pressing and holding the button in the upper center of the bypass tray, pull the tray open.

Machine illustration

4Using a damp cloth, wipe the paper feed roller. Then, wipe it with a dry cloth to remove any water.

Paper feed roller illustration

5Close the bypass tray.

Machine illustration

6Securely insert the plug of the power cord into the wall socket securely. Connect all the interface cables that were removed.

7Turn the main power switch on.