Previous
If a firmware update is available, the message “Update Available” appears on the screen. Check the update information and update the firmware to the newest version.
Detailed update information is available on the following Web site:
Perform the firmware update from the machine.
Do not press and hold the [Power] key/
or remove the power cord during the update.If the network connection is lost during an update, the update will fail. We recommend performing the update in a wired network environment.
If a required firmware update is detected when the machine is turned on, the firmware update screen will appear automatically. If this is the case, you cannot start a meeting or accept a registration request until the update is complete. Check the update information, and then start the update immediately.
In the Features screen, press the [
] or [
] key to select [Configuration Menu], and then press the [Enter] key/
.
Press the [
] or [
] key to select [Firmware Update], and then press the [Enter] key/.
Press the [] or [] key to select [Update], and then press the [Enter] key/.
Press the [] or [] key to select [Update], and then press the [Enter] key/.
The machine automatically restarts and begins the update.
When updating the firmware to a version that is two levels higher or more, the update process repeats until all updates are complete.
To cancel an update, select [Cancel], and then press the [Enter] key/. Wait until the update has process is canceled, and then turn the machine off.
When the update is complete, press the [] or [] key to select [Turn Off] or [Restart], and then press the [Enter] key/.
If you want to use the machine after the firmware update is complete, you must restart the machine.
The time required to complete an update depends on the update.
No other features can be used while an update is in progress. To use another feature, you must cancel the update and restart the machine.
A firmware update doesn't change the machine's network settings and Address Book data.
If an update fails, a message appears on the screen. If this is the case, follow the instructions in the message to resolve the problem.
