Previous
Network Diagnosis performs a connection test that allows you to check whether or not the machine can connect to a network and is ready to use services. The test is performed according to the Wired/Wireless Network Configuration settings.
Use Network Diagnosis in the following cases to determine the cause of the problem with the network configuration of the machine, the network environment, or the network itself.
The machine is unable to connect to the network
The network configuration has changed
The network environment has changed
In the Features screen, press the [
] or [
] key to select [Configuration Menu], and then press the [Enter] key/
.
Press the [
] or [
] key to select the [Network Diagnosis], and then press the [Enter] key/.
Press the [] or [] key to select the [Start], and then press the [Enter] key/.
To abort the connection test, select [Cancel] and press the [Enter] key/.
The Result of Network Diagnosis screen appears. Check the test results.
If the large number of test results prevents them all from being displayed at the same time, press the [] key to select the test result, and then press the [] or [] keys to scroll through the results.
After checking the test result, make sure that [OK] is selected, and then press the [Enter] key/.
If the test result is selected, press the [] key to select [OK], and then press the [Enter] key/.
