Previous
Wired Network Configuration or Wireless Network Configuration contains the following settings that can be configured.
Ask the network administrator about which settings need to be specified in Wired/Wireless Network Configuration, and then enter the correct values.
Profile
Select profile you want to change or apply.
Wired Setting 1 - 5 (Wired Network Configuration)
Wireless Setting 1 - 5 (Wireless Network Configuration)
If a profile was applied the last time the machine was used, that profile is displayed as the currently selected profile.
SSID (Wireless Network Configuration only)
Specify the SSID that identifies the wireless LAN network.
Select from the list
Select the SSID from the list of available wireless LANs.
Press the [
] [
] [
] key to select the wireless LAN you want to use, and then press the [Enter] key/
.The list is displayed in the order of the strong radio waves.
Enter SSID
Enter the SSID directly.
Press the [
] [] key to select [Enter], and then press the [Enter] key/.The SSID can be up to 32 alphanumeric characters and symbols in length.
The SSID is case-sensitive.
Authentication Method (Wireless Network Configuration only)
Specify the authentication method for the wireless LAN.
Network Authentication
Encryption Method
Encryption Key Character Set
Encryption Key
Key Index
802.1X Authentication:
If "Encryption Method" is set to [WEP], specify the key index.
For mainly North America
If " Network Authentication" is set to [WPA-EAP] or [WPA2-EAP], specify 802.1X Authentication:.
IP Address
Specify the IP address, subnet mask, and default gateway settings for the machine on the network.
IP Address Configuration Method
IP Address
Subnet Mask
Default Gateway
If "IP Address Configuration Method" is set to [Manual Configuration], enter the IP address, subnet mask, and default gateway.
DNS Server
Specify the DNS server.
DNS Server Configuration Method
Primary DNS Server
Secondary DNS Server
If "DNS Server Configuration Method" is set to [Manual Configuration], enter the IP address of the DNS server.
If "IP Address Configuration Method" for "IP Address" is set to [Manual Configuration], you cannot set "DNS Server Configuration Method" for "DNS Server" to [Auto-Obtain].
Proxy Server
Configure the proxy server.
Use Proxy Server
Address / IP Address
Port
Use Proxy Authentication
User Name
Password
If "Use Proxy Server" is set to [Yes], enter the IP address or the host name and port number of the proxy server.
If "Use Proxy Authentication" is set to [Yes], enter the user name and password.
This machine only supports Basic authentication as proxy authentication.
