Skip header
Help
 

Home Position

You can specify the transmission settings that are applied after the power is turned on or the [Clear/Stop] key is pressed.

Home Position

  • Image density

    One the five image density levels can be specified as the home position.

  • Resolution

    One of either Standard, Detail, or Fine can be specified as the home position.

  • Auto density

    Auto density can be specified as the home position by setting this to on or off.

  • Original type

    One of Text, Photo or Text/Photo can be specified as the home position.

  • Transmission mode

    Either Immediate Transmission or Memory Transmission can be specified as the home position.

  • Fax header

    The fax header can be specified as the home position by setting this to on or off.

Home Position Parameter List

For details about setting parameters, see Parameter Settings.

Do not change switches other than those listed.

Switch

Bit

Item

0

1

00

3,2,1

Image density

000: Normal density*

001: The lightest density

010: The darkest density

101: Lighter density

110: Darker density


00

5,4

Resolution

00: Standard*

01: Detail

10: Fine


00

6

Auto density

Off*

On

01

1,0

Original type

00: Text

01: Photo

10:Text/Photo*


02

1

Transmission mode

Memory transmission*

Immediate transmission

02

6,5

Fax header

Off*

On

* This is a factory default.