Skip header
Help
 

Changing the user parameters

Important

  • It is recommended that you print and keep a user parameter list when you program or change a user parameter.

  • Do not change any bit switches other than those shown on the previous pages.

1Press the [User Tools] key.

2Press [Login].

3Enter the login password, and then press the [OK] key.

4Press the [Up arrow key] or [Down arrow key] key to display [Fax Features], and then press the [OK] key.

5Press the [Up arrow key] or [Down arrow key] key to display [Administrator Tools], and then press the [OK] key.

6Press the [Up arrow key] or [Down arrow key] key to display [Parameter Setting], and then press the [OK] key.

7Press the [Up arrow key] or [Down arrow key] key to display [Parameter Setting], and then press the [OK] key.

If you want to specify the home position setting, select [Home Position].

To print the parameter settings list, select [Parameter Settings List], and then press the [B&W Start] or [Color Start] key.

8Select the switch number you want to change using the scroll key, and then press the [OK] key.

9Select the bit number you want to change.

10Press the [OK] key.

11Repeat Steps 8, 9, and 10 to change the switch settings.

12After all the settings are finished, press the [Escape] key.