Maintenance: Image

You can perform automatic adjustment of color registration. For details, see When the Color Registration Shifts.

You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing. For details, see When the Printed Color Changes.

• Adjust Auto Density

  You can print the gradation of auto density.

• Print Test Pattern 1 for Calibration

  You can print gradation correction sheet 1.

• Print Test Pattern 2 for Calibration

  You can print gradation correction sheet 2.

• Reset Setting

  You can reset the gradation correction value to default.

You can adjust the starting position of the printing page. For details, see When the Printing Position Changes.

• Print Test Sheet

  You can print the registration test sheet.

  Only the installed trays appear on the display panel.

  • Paper Tray 2–5

  • LCT

  • Bypass Tray

  • Duplex Unit

• Adjust Position

  You can select the start position for printing on a page.

  Only the installed trays appear on the display panel.

  • Vertical: Tray 2–5

  • Vertical: LCT

  • Vertical: Bypass Tray

  • Vertical: Back Side

  • Horizontal: All Trays

  • Horizontal: Bypass Tray

  • Horizontal: Back Side

This mode adjusts levels of toner color overlap. If characters or lines blur, setting priority on text may make them clearer. Under normal conditions, set priority on photo.

• Text Priority

• Photo Priority

Default: [Photo Priority]