Skip header
 

Top Page > Operating Instructions > Getting Started > Guide to Names and Functions of Components > Inserting/Removing a Memory Storage Device > Inserting a USB flash memory device

Inserting a USB flash memory device

Important

  • Certain USB flash memory device cannot be used.

  • Do not use a USB extension cable to connect a USB flash memory device to the printer. Insert the USB flash memory device directly into the media slot.

1Align the USB flash memory device in the correct direction, and then push it straight into the media slot.

Media slot illustration

When the USB flash memory device is inserted correctly, the media access lamp beside the media slot lights.

Note

  • The media access lamp lights up and remains lit as long as a USB flash memory device is inserted.

PreviousNext