Turning On/Off the Power
When you turn the machine off, make sure you press and hold down the [Power] key. If you unplug the Power cord from the wall outlet, ink consumption for maintenance operations may increase.
Power supply
[Power] key (right side of the control panel)
Press to activate the machine. When the machine has finished warming up, all its functions are available.
If the power switch is "On" but the machine is not used for a while, the machine automatically enters Energy Saver mode to reduce its power consumption. For details about the Energy Saver mode, see Saving Energy
and Timer Settings.If the "Temperature is too low. Cannot use the machine now. Please wait..." or "Temperature is too high. Cannot use the machine now. Please wait..." message appears, check the machine's environment is not too hot or cold. For details about the operating temperature range, see Out of Printable Temperature Range
.If power is restored after a power failure, the machine resumes the operation that it was performing before the power failure. If the machine was turned on before the power failure, it will turn on again. (For example, if a model installed with the fax function was receiving a fax before the power failure, it will resume fax reception.)
