Timer Settings
This section describes the user tools in the [Timer Settings] menu under [System Settings].
Auto Power Off Timer
After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy. This function is called "Auto Off".
The time can be set from 1 to 240 minutes, using the number keys.
For the [Auto Power Off Timer], specify the time to elapse before Auto Off.
You can specify this setting only if [Auto Power Off] is set to [On] in [Administrator Tools] in [System Settings]. The factory default setting of [Auto Power Off] is [Off].
Default: [60 min.]
Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes, using the number keys.
Default: [15 min.]
System Auto Reset Timer
The System Reset setting automatically switches the screen to the function set in [Function Priority] when no operations are in progress. This setting is used to specify a system reset interval.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 sec.]
Copier Auto Reset Timer
Specify the time to elapse before the copier function is reset.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 sec.]
Facsimile Auto Reset Timer (SG 3110SFNw only)
Specify the time to elapse before the facsimile function is reset.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 sec.]
Printer Auto Reset Timer
Specify the time to elapse before the printer function is reset.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 sec.]
Scanner Auto Reset Timer
Specify the time to elapse before the scanner function is reset.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], [60 sec.]
Set Date
Set the date for the machine's internal clock using the number keys.
To change between year, month, and day, press the [
] and [
] key.
Set Time
Set the time for the machine's internal clock using the number keys.
To change between hours, minutes and seconds, press the [] and [] key.
Enter the time using the 24-hour format (in 1 second increments).
Auto Logout Timer
Specify whether or not to automatically log out a user when the user does not operate the machine for a specified period of time after logging in.
The time can be set from 10 to 999 seconds, in one second increments, using the number keys.
Default: [On], [60 sec.]
To change the default settings, see Changing Default Settings in the User Tools Menu
.
