Download the printer driver file.
Close all applications except this manual.
Double click the downloaded file and unzip it at an easily accessible location.
Check that the power of the printer is off.
Connect the printer to your computer with a USB cable.
Make sure to connect the USB cable firmly.
Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
In the [Found New Hardware] window, click [Locate and install driver software(recommended)].
If the [User Account Control] window appears, click [Yes] or [Continue].
Specify the location where the source files of the printer driver are saved.
In the [Disk1] folder, specify the INF file.
Check the printer driver location, and then click [Next].
Click [Finish].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the [Printers] window.
The number after "USB" varies depending on the number of printers connected.