DHCP

Use the “dhcp” command to configure the DHCP settings.

Reference

The following command displays the current DHCP settings.

msh> dhcp

Configuration

You can configure the DHCP settings.

msh> dhcp interface_name [on | off]

Select [on] to enable DHCP. Select [off] to disable DHCP.

Interface Priority Configuration

You can assign priorities governing which interface obtains DHCP parameters.

msh> dhcp priority interface_name

Priority assignment is useful when connecting more than one interface to the printer.

If an interface is not selected, it appears according to the currently set priority regardless of multiple interface connections.

Interface name	Interface to be configured
ether	Ethernet interface