Skip header
 

Making combined copies and 2-sided copies

You can combine multiple pages (2 or 4 pages) of an original onto a single page. Also, with the Type 2 model, you can scan 2-sided originals and make 2-sided copies.

Important

  • This function is only available when the original is set in the ARDF or ADF, not when it is set on the exposure glass.

Example of combined copying

Illustration of combined copy

Example of 2-sided copying

Illustration of 2-sided copy

You can either set this machine to always make combined/2-sided copies, or use this function only when necessary.

Preparation for making combined/2-sided copies

To always make combined/2-sided copies:

  1. Configure the machine's default [Duplex/Combine] setting.

    For details, see Copy Settings.

To use this function for the current job only:

  1. Configure the setting by pressing [Dup/Comb] before starting the current job.

    For details, see Combining Pages and Making 2-sided Copies.

Note

  • You can make 2-sided copies manually with the Type 1 model.

Reference