Skip header
 

Top Page > Software Guide > Making Printer Settings Using the Control Panel > List/Test Print Menu > Printing the Configuration Page

Printing the Configuration Page

Use the following procedure to print the configuration page.

Important

  • The configuration page is printed on A4 or Letter (81/2 " x 11 ") size paper from the priority tray. Load this size of paper into the priority tray before printing the configuration page.

1Press the [Menu] key.

Menu key illustration

The menu screen appears.

2Press the [Up arrow key][Down arrow key] keys to select [List/Test Print], and then press the [OK] key.

3Press the [Up arrow key][Down arrow key] keys to select [Config. Page], and then press the [OK] key.

The configuration page is printed. The [List/Test Print] screen appears on completion of printing.

4Press the [Menu] key to return to the initial screen.

Note

  • If you start configuration page printing when appropriate paper is not loaded, an error message appears. If this happens, load appropriate paper in a tray, and then perform a form feed, or cancel the job.

Reference