Specifying standard size paper for the bypass tray
This describes how to load standard size paper into the bypass tray.
When you specify the bypass tray as the input tray on the printer driver and perform printing, if you set [Bypass Priority] to [Any Size/Type] under [Paper Input] on the control panel, the printer ignores the paper type and size settings made on the control panel. Printing is performed with the settings made on the printer driver.
If you set [Bypass Priority] to [Machine Setting] under [Paper Input], paper size settings made on the printer driver must match those made on the control panel. If they do not match, an error message appears and printing stops if [Auto Continue] is not set to [On] under [System].
Press the [Menu] key.
Press the [
] or [
] key to display [Paper Input], and then press the [OK] key.
| Menu: Paper Input |
Press the [] or [] key to display [Paper Size], and then press the [OK] key.
| Paper Input: Paper Size |
Press the [] or [] key to display [Bypass Ppr Size], and then press the [OK] key.
| Paper Size: Bypass Ppr Size |
Press the [] or [] key to select the paper size you want to set, and then press the [OK] key.
| Bypass Ppr Size: A4 |
Press the [Menu] key.
The number of pages that can be loaded in the bypass tray differs depending on the paper type.
