Normal memory mode

Press the [Memory/Class] key.

Use the [] or [] key to select [Memory], and then press the [OK] key.

Use the number keys to enter the number of prints you want for each original, and then press the [] key.

Repeat this step until you have entered for all the originals.

Press the [OK] key.

If you want to use the optional tape dispenser, turn on the tape dispenser switch.

The optional tape dispenser automatically feeds paper strips to separate the prints made from each original.

Set your original.

Make sure the [Master Making] mode select key is lit.

If it is not lit, press the [Master Making] mode select key.

Press the [Start] key.

Printing starts automatically after the trial print.