Skip header
 

Top Page >  User's Guide > Trying Out this Application Using Sample Files > Practice 2: Making a Booklet > Preparation

Preparation

Before you begin the practice, you must do the following:

No.

Step

Explanation

1

Start this application

For details about starting this application, see Setup Guide.

2

Prepare the sample files

Sample files used in Practice 2

  • Setup Guide.pdf

  • L_A4.tif, R_A4.tif (L_LT.tif, R_LT.tif)

Location of sample files

  • Setup Guide.pdf

    {Installation path of this application}\manual\

  • L_A4.tif, R_A4.tif (L_LT.tif, R_LT.tif)

    {Installation path of this application}\samples\

Note

  • If you selected the default installation path when you installed this application, {Installation path of this application} is the following folder:

    C:\Program Files\TotalFlow MR\

3

Check your printer

Confirm that you have registered the printer you will be using.

Reference

4

Prepare printing paper

Load the paper for the booklet in the input tray of the printer. The paper you must set is as follows:

For Booklet [A]

  • Paper Size: A4 (210 × 297 mm) or Letter (8.5 × 11)

  • Number of sheets (per booklet): 16 booklet sheets, 3 tab stock sheets*1 *2

For Booklet [B]

  • Paper Size: A4 (210 × 297 mm) or Letter (8.5 × 11)

  • Number of sheets (per booklet): 8 booklet sheets

Reference

  • For details about loading paper in your printer’s input tray, see your printer’s documentation.

*1 If you do not have tab stock, it is not necessary to perform steps related to inserting tab stock.

*2 When using tab stock, remove any tab stock that will not be used for the job from the tab stock tray.