Previous
If there is no paper in the machine that matches the size of a received document, the machine will choose a paper size based on the paper available.
If you have not set the same size paper in the paper tray, incoming fax documents are printed on the nearest size available.
For example, if your machine does not have A4 loaded and you receive an A4 size document, the document is printed on A3. If your machine does not have A3 loaded and you receive an A3 size document, the document is printed on two sheets of A4.
This function is available only if the following settings are made:
Page reduction: Disabled
Reduction in Sub-scan Direction: Enabled
Page Separation Threshold: 20 mm (0.8 inch)
Width or Length Priority: Width
The document is split over two sheets of paper depending on the paper size. See Page Separation and Length Reduction
.Paper placed in the bypass tray is not usually selected for printing a received document. However, you can use this tray if you select the bypass tray as the main paper tray using Reception with Specified Senders.
Widths that this machine can receive are A4, B4 JIS, 81/2 × 11 and A3. Any documents narrower than A4 or 81/2 × 11 are received at A4 or 81/2 × 11 width. The length of documents depends on the document.
The paper size used to print a received document may be different from the size of the sent original.
For details about page reduction, see Page Reduction
.
