Erasing Colors

Copies by erasing a certain color in the image of the original.

This function can be used when [Full Colour] or [Black & White] is selected in the color mode.

Illustration of Erase Color

Select a color mode.

Press [Edit / Colour].

Operation panel screen illustration

Press [Colour].

Press [Erase Colour].

Select the color to be erased.

Operation panel screen illustration

Up to four colors can be erased at the same time.

Press [OK] twice.

Place the originals, and then press the [Start] key.

To cancel the selection, press the selected (highlighted) key.
When [Full Colour] is selected, the full color counter values will increase.
The width of the color to be erased can be adjusted in five levels. When the width of the color is set to [Wider] under [Colour Sensitivity] in User Tools and red has been specified, colors close to orange and purple will be erased. You can change the setting. For details, see Adjust Colour Image .