Skip header
 

SADF Mode

In SADF mode, even when an original is placed page by page in the ADF, each page is automatically fed when placed.

1Press [Special Original].

Operation panel screen illustration

2Press [SADF], and then press [OK].

3Place one page of an original, and then press the [Start] key.

4When the machine instructs you to place another original, place the next page.

The second and subsequent pages will be fed automatically without pressing the [Start] key.

Note

  • When the Sort, Combine or 1 Sided 2 Sided function has been selected, press the [Sharp] key after all originals have been scanned.

  • You cannot switch between one-sided and two-sided originals during copying.

  • When [Batch] is displayed instead of [SADF], specify the SADF mode under [Switch to Batch] in User Tools. For details, see Input / Output.

  • In SADF mode, an original must be placed within a specified time after the previous original has been fed. You can adjust this time under [SADF Auto Reset] in User Tools. For details, see Input / Output.

PreviousNext