Previous
This section describes Box Settings.
The following functions are for delivery and transfer of documents:
Personal Box
Information Box
Transfer Box
SUB Code and SEP Code
SUB Code and SEP Code are IDs consisting of up to 20 digits, and can include numbers, [
], [
], and spaces.
To use this function, you must program a box and SUB/SEP Code beforehand. The other party can send documents to, and retrieve stored documents from, this box using the code.
For the maximum total number of Personal Boxes, Information Boxes, and Transfer Boxes that can be registered, see Maximum Values
.You cannot set the same box code on two different boxes.
Transmission or programming may not be allowed if there is not enough free memory left. The amount of free memory left differs depending on the optional equipment installed.
If a parameter other than [Print] is set to [Output Mode] in [General Setting] under [Output Mode Switch Timer] in [Reception File Settings], Personal Boxes, Information Boxes, or Transfer Boxes may not be modified or deleted. If this is the case, check the [Output Mode Switch Timer] setting.
