Skip header
 

Preset Stamp

Messages registered in advance, such as "COPY", are stamped on copies.

Illustration of Preset Stamp

Depending on your model and which options are installed on it, this function might not be available. For details, see "Functions Requiring Optional Configurations", Getting Started.

Important

  • You cannot use the bypass tray with this function.

  • Only one message can be stamped at a time.

The following eight messages are available for Preset Stamp:

"COPY", "URGENT", "PRIORITY", "For Your Info.", "PRELIMINARY", "For Internal Use Only", "CONFIDENTIAL", "DRAFT"

1Press [Edit / Stamp].

Operation panel screen illustration

2Press [Stamp].

3Press [Preset Stamp].

4Select the desired message.

Operation panel screen illustration

5Press [Change].

6Select the stamp position, size, and density, and then press [OK].

Operation panel screen illustration

7Press [All Pages] or [1st Page Only] to select the print page.

8Press [OK] twice.

Note

  • Depending on paper size, if you change the stamp size, parts of the stamp might not be printed.

  • You can change the size and pattern of stamps. Depending on the setting, stamp density may change.

  • For details, see Stamps.

  • You can change the settings for Preset Stamp under [Preset Stamp] in User Tools. For details, see Preset Stamp.

PreviousNext