Skip header
Help
 

Ethernet Configuration

Important

  • Configure the printer for the network using the control panel.

  • The following table shows the control panel settings and their default values. These items appear in the [Network] under [Host Interface] menu.

Setting Name

Default

Machine IPv4 Address

  • Auto-Obtain (DHCP): On

  • IPv4 Address: 11.22.33.44

  • Subnet Mask: 0.0.0.0

  • Gateway Address: 0.0.0.0

IPv6 Stateless Setting

Active

IPsec

Inactive

NW Frame Type

Auto Select

Effective Protocol

  • IPv4: Active

  • IPv6: Inactive

  • NetWare: Inactive

  • SMB: Active

  • AppleTalk: Inactive

Ethernet Speed

Auto Select

IEEE802.1X Auth.(Ethernet)

Inactive

Restr.IEEE802.1X Auth.Def.

-

LAN Type

Ethernet

Permit SSL/TLS Comm.

Ciphertext Priority

Note

  • If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.

  • If the printer is already placed on a TCP/IP-capable environment, you can also use a Web browser to configure the IP address-related settings.

  • Configure these setting as necessary. See Software Guide for details.