Ethernet Cable Connection

Prepare a hub and other network devices, and connect the Ethernet cable to the printer.

Connect 10BASE-T or 100BASE-TX cable to the printer's Ethernet port. For 1000BASE-T, the optional Gigabit Ethernet board is required.

For users outside the United States of America: properly shielded and grounded cables and connectors must be used for connections to a host computer (and/or peripheral) in order to meet emission limits.

For users in the United States of America: properly shielded and grounded cables and connectors must be used for connections to a host computer (and/or peripheral) in order to meet FCC emission limits.

An Ethernet cable is not supplied with this printer. Select your cable according to the network environment.
The printer's Ethernet and USB ports are not available when the Gigabit Ethernet board is attached to the printer.

Connecting to the standard Ethernet port

Connect the Ethernet cable to the Ethernet port.

Rear side of the printer illustration

Connect the other end of the cable to the network, for example using a hub.

Connecting to the Ethernet port of the Gigabit Ethernet board

Connect the Ethernet cable to the Ethernet port of the Gigabit Ethernet board.

Rear side of the printer illustration

Connect the other end of the cable to the network, for example using a hub.

For details about configuring the network environment, see Ethernet Configuration.
For details about installing the Gigabit Ethernet board, see Installing the Interface Units.