Skip header
ContentsPreviousNextHelp

The Screen in Scanner Mode

This section provides information about the screen in scanner mode.

By default, the display shows the copier screen when the machine is turned on. If the copier or fax screen is shown on the display, press the [Scanner] key on the control panel to switch to the scanner screen.

Scanner key illustration

Screen in standby mode

Operation panel screen illustration numbered callout illustration

  1. Current status or messages

    Displays the current status or messages.

  2. Current settings

    Displays the current scanning mode and scan settings.

    • When "Specify Dest." is displayed:

      Scan to E-mail, Scan to FTP, or Scan to Folder functions can be used.

    • When "Save Scn Data to USB" is displayed:

      A USB flash disk is inserted in the machine, and the Scan to USB function can be used.

  3. Selection key items

    Displays the functions you can use by pressing the corresponding selection keys.

Note

Reference