Skip header
ContentsPreviousNextHelp

Top Page > Using the Copier Function > Combining Multiple Pages > Copying Two or Four Pages onto One Sheet

Copying Two or Four Pages onto One Sheet

This section describes how to set 2-in-1/4-in-1 copy mode for the current job.

Important

2-in-1 mode

You can copy two pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:

  • Portrait

    Illustration of Portrait

  • Landscape

    Illustration of Landscape

Scaling is preset according to the paper size: 70% for A4 size, 64% for Letter size, and 60% for Legal size.

4-in-1 mode

You can copy four pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:

  • Portrait: L to R (Left to Right)

    Illustration of Portrait L to R

  • Portrait: T to B (Top to Bottom)

    Illustration of Portrait T to B

  • Landscape: L to R (Left to Right)

    Illustration of Landscape L to R

  • Landscape: T to B (Top to Bottom)

    Illustration of Landscape T to B

Scaling is preset to 50%, regardless of the printout paper size.

Use this procedure to set 2-in-1/4-in-1 copy mode for the current job.

  1. Press the [Reduce/Enlarge] key.

    Reduce/Enlarge key illustration

  2. Press [Reduce], press the [Up arrow key][Down arrow key][Left arrow key][Right arrow key] keys to select [Comb. 2 on 1] or [Comb. 4 on 1], and then press the [OK] key.

  3. Press the [Up arrow key][Down arrow key] keys to select the desired printout format, and then press the [OK] key.

    • If [Comb. 2 on 1] has been selected, select [Portrait] or [Landscape].

    • If [Comb. 4 on 1] has been selected, select [Portrait: L to R], [Portrait: T to B], [Landscape: L to R], or [Landscape: T to B].

Note

Reference

TopPreviousNext
Copyright (C) 2011