



	Contents Previous Next

Top Page > Getting Started > Configuring the Machine > Configuring Telephone Network Settings > Setting the outside line access number

Setting the outside line access number

If the machine is connected to the telephone network through a PBX, set the dial number to access the outside line.

Make sure to set the outside line access number that matches the setting of your PBX. Otherwise, you may not be able to send faxes to outside destinations.

Press the [User Tools] key.
Press the [] [] keys to select [Admin. Tools], and then press the [OK] key.
If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.
Press the [] [] keys to select [PBX Access Number], and then press the [OK] key.
Enter the outside line access number using the number keys, and then press the [OK] key.
Press the [User Tools] key to return to the initial screen.

You can press the [Escape] key to exit to the previous level of the menu tree.
A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].

For details about [Admin. Tools Lock], see Administrator Settings.