Erase Centre / Border
This function erases the center and/or all four sides of the original image.
This function has the following three types:
Erase Border
Erases the edge margin of the original image.
Erase Centre
Erases the center margin of the original image.
Erase Centre / Border
Erases both the center and edge margins of the original image.
The relationship between the original orientation and the erased part is as follows:
original
original
Erased part
2
99 mm (0.1 3.9 inches)
The erase width is set to 10 mm (0.4 inches) as a default. You can change this setting under Edit in User Tools. For details about Edit, see “Edit”.
The width of the erased margin varies depending on the reproduction ratio.
