Top Page > Hardware Guide > Maintaining the Printer > Replacing the Maintenance Kit
Replacing the Maintenance Kit
|
The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise, an injury might occur. Grip the plug, not the cord, when pulling the plug from the socket. Pulling the cord causes wear and tear that can result in fire or electric shock. Wait at least one hour after power off before replacing parts. Not allowing the printer to cool may result in burns.
|
When to replace the Maintenance Kit.
The maintenance kit contains parts for maintaining the printer.
Replace the maintenance kit if the following message appears on the display:
“Replacmnt Requrd:Maint. Kit”
When the following message appears on the display, the maintenance kit contains parts should be replaced soon. Prepare a new maintenance kit.
“Repl Requrd Soon:Maint. Kit”
